Automotive Tools

Product Details:

Shaft Alignment Tools in any rotating machine would help in enhancing life of couplings, bearings and seals. Our right alignment kit contains aluminum V-block that can be clamped on the hub of coupling by wing nuts. To get accurate indexing of 90 Degree, 180 Degree, 270 Degree, 360 Degree, the kit has two precision spirit levels in the V-block. To take care of different spacer lengths between couplings suitable extension pins, dial holder pins, clamps are provided. Moreover, there are two dials one is used for axial and other for radial misalignment. The rim/face method in spacer type couplings or the additional V-block in case of non spacer couplings like love joy, pin bush, tyre couplings are useful for taking both radial/axial readings. Moreover, the V-block is to be clamped on the hub of driver coupling.

Product Details:

Any bearing can be conveniently heated and mounted. small and medium-sized bearings up to 20-25mm i.d. can be cold mounted using a bearing fitting kit but any bearing having i.d. of 40mm or more must never be cold mounted. please understand bearings can cause scoring on shafts thus damaging the shaft. This happens because bearings are hard (60-62 RC) whereas shafts are generally soft. moreover forcing bearing on shaft manually or hydraulically can cause internal damage to bear. as the bearing i.d. increases beyond 40mm the interference between bearing/shaft is high and hence it is mandatory to do the hot mounting. heating causes the necessary expansion of bearing /coupling avoiding damage to both shaft and bearing.
conventionally many industries have been doing cold mounting of medium/large bearings since oil bath heating is risky, cumbersome, time taking and inaccurate. induction heaters are fast, safe, very accurate, very convenient and it is the way the “whole world works”. life of bearings and other rotating machines would considerably improve by using induction heaters.

Ekta little master induction heaters can heat bearings from 20mm i.d. 380 i.d. / 620 o.d. no hammering. no force, no oil bath. it takes a few minutes. it is convenient, easy, safe, very effective. all heaters are energy officiant with stepped wound core.


Features of Little Master:

• Operates on single phase, two-phase supply
• Temperature – 0 - 300 °c with an accuracy of 1°c
• Magnetic temperature sensor
• PID controller to set cut off heating at the preset temperature
• Buzzer to indicate heating cycle complete
• 05 different sizes of yokes for different size of bearings
• Solid state control
• 2 years warranty

Product Details:

Our company offers Bearing Mounting Tools, which are portable steel box. These kits are convenient, versatile tool to mount medium and small-sized bearings without causing any damage to them. The kit consists of ground, hardened, individually numbered sleeves and impact rings. The size of these impact rings is as per bearing and the impact sleeve is common for a group of ring. The mounting forces are evenly distributed to both bearing rings by the use of correct impact ring and sleeve combination. This process increases the operating life of bearings and prevents damages. These kits can also be used to mount gears, sleeves, coupling and pulleys. Moreover, these kits are highly durable.

 

We offer two standardized models of these fitting tool kits such as:

Economy model: We offer an economy model of fitting tool kit which are popularly used in bearings in the industry from 20 mm i. D. To 50 mm i. D. Any bearing less than 20 mm i. Dare not covered by this model.

 

Specifications:

• 14 impact rings
• 01 nylon hammer
• 03 impact sleeves
• weight is 11 kg

 

Full kit: We offer a full kit which covers bearing from 10 mm i. D to 50 mm i. D

Apart from the standard models, we customize these kits according to the requirements of our clients. But for this purpose, we need the specifications of the bearing that the client uses.

The salient features of our range of bearing mounting tools are listed below:

• increases the life of bearings
• reduces downtime
• dispenses with the need to use specialized skills to mount bearings
• eliminates damage to shaft/housing

Product Details:

We offer Light Weight Pumps made from high-quality raw material. These pumps are preferred by our customers because of the diverse range of applications it can be used in. The pumps are generally used in applications where space is a constraint. They are used in lifting heavy equipment during erection/commissioning or lifting of heavy motors. The pumps are renowned for their durability and reliability apart from high resistance to daily wear and tear.

 

Additional Information:

• Production Capacity: .